© 2017, Norebro theme by Colabr.io Team, All right reserved.

What to Know About The Different Types of Diving Boards


Jack Gordon - August 24, 2020 - 0 comments

If you would like to enhance your swimming experience in your home pool then you should consider getting a diving board.

Whether you like to spin around mid-air or just feel the thrill while diving into the water at a height, the board will make it more exhilarating for you. They come in different types each having its own unique features to suit certain needs.

To be able to make a well-informed decision before buying any you should have the relevant information. Here is what you need to know. You can also refer to this link for more information https://bluewaterspoolservices.com/diving-board/.

What are the types available?

The classification can be done into two groups namely; springboard and platform board. The former as the name suggests has sprung. As such, it increases your jumping acceleration or thrust thereby enabling you to go higher. This grants you much jump time to be able to do the tricks you like before falling into the water below.

On the other hand, the platform board has no springs attached to it thus will not add to your jumping level. It is considered the safest as it limits how high you can go hence minimizing the risk of possible injuries. With it, you can anticipate the height of your jump as opposed to the spring which is dependent on the force applied to it. It is also stationary even when you are standing at the edge.

Another benefit of the platform is that it doesn’t require much maintenance. You just have to make sure that it is kept clean and firmly fixed. For the other one, you have to ensure that the springs are in good condition with no rust or lose points. Therefore, most homeowners consider it risky with a lot of maintenance requirements.

What factors should one consider?

In addition to the type, there are other important factors that one should take into account before deciding to buy and install a certain board. These include:

The depth of your pool

Diving from such great heights as offered by this equipment requires a deep enough pool to be able to accommodate the fall safely. The right pool for instance should have a deep end of at least 8 feet so that you don’t hit the bottom.

Of course, the deeper the better but it shouldn’t be too deep. To determine the appropriate depth, you should have professional contractors calculate the diving depth of your pool.

A springboard requires more depth than a platform. Click here to find out what more things you should consider.

The material of the plank

Different materials are used for the manufacture of the panel based on their mechanical properties and look. The most used materials are wood, hard plastic, and composites.

In terms of mechanical strength, a composite is better as it is designed with multiple substances to make it tough with the ability to handle a lot of stress.

You won’t have to worry about it breaking while in use. Some are also resistant to corrosive elements hence are durable. Wood on the other hand can be used to provide that classic look but is more vulnerable to breaking and rotting especially when it gets in contact with water. Hardwood can be used to correct this but it is scarce and expensive.

Your home’s insurance cover policy

Home Insurance companies have different policies. Depending on the firm, they might cover all types of pools or exclude those with diving boards. The latter will make you liable should there be any accidents involving your pool. Therefore, before you buy this equipment you should check with your insurance company to be clearly aware of their policy. If they don’t cover such then you can opt for a different firm or a separate one for the pool.

The installation process

This should be done with utmost care for the correct functioning of the diving plank. Installing a diving board usually involves building a strong metallic base known as the jig before fastening the plank with bolts. The work requires skill and experience hence it is recommended that it only be done by qualified professionals. Repairs should also be done by skilled personnel to avoid further damage. An issue as small as a loose bolt can cause a diver to slip and injure themselves.

Your contractor’s advice

Since they are the one who constructed the pool, they are better placed to advise you on matters such as the best point for installation and the type of board that best suits the pool. If possible, you should have them do the work too instead of hiring other professionals. If they did a great job with the pool then they’ll probably do so with this also.

The local building codes

This refers to legal regulations concerning the building or installation of such structures. They involve information such as the required diving envelope, warning signs and specific dimensions. Some of the information is for the technician. Failure to adhere to these regulations might get you in trouble with the authorities.

Your style

After adhering to all the safety and legal requirements it now comes down to your personal style. You can decide to go for the traditional appeal and use wood or choose a modern look and opt for sleek composites.

You can also add additional glamour such as the waterfall effect or LED lights that illuminate the sides of the plank. If you’d like to have the springs hidden then you can have them covered.

All these additional features come at a cost thus you should be ready to part with some considerable amount of money. Learn how to jump off a diving board from this simple guide https://www.sportsrec.com/179209-how-to-dive-off-a-diving-board.html.

Conclusion

There is no doubt that diving adds more fun to swimming. The only downside is that it also increases the risk of injuries and fatalities. Therefore, it should be done in the right way using the right equipment that are designed for this purpose. The installation and repairs should be done properly by qualified people. The set rules and recommendations also ought to be incorporated in the whole process. Remember to put safety first when dealing with diving boards.

Related posts